Time-Limited Radium Engineering Dry Carbon Fibre Fuel Cell Lid – Suits 10/14 Gallon Tank

Description

This optional carbon fiber lid is 68% lighter than the powdercoated aluminum lid that comes standard with all Radium Engineering fuel cells.
Installation:

• If removing a drop-in fuel pump assembly, such as an FCST, reference those specific instructions.
• Use a 5/32″ (or 4mm) Allen wrench for the stainless steel button head bolts.
• Use a 7/16″ wrench for the flange head nuts underneath the perimeter bolts.
• For the Phillips head screws that secure the inspection plate, use a micro screwdriver.
• Be careful not to overtighten any bolts that could crack the carbon fiber resin.

NOTES:

• This product is currently only available for 10 and 14 gallon RA-series fuel cells.
• Discontinued 15 gallon RA-Series Fuel Cells are compatible with 13-0410-01.
• If purchasing with a fuel cell, this product will come in a separate box and will need to be installed by the end user.
• The standard Radium Engineering aluminum lid cannot be exchanged.
• Follow the instructions below for installing this lid.